Pump Skid

Pump Skid Package:
Ace FuelSafe Pump Sets use Rotary Gear, positive displacement, continuous duty pump with internal relief mounted in an outdoor rated enclosure w/ lockable door, spill containment and leak switch. Pump set is designed to work with Ace Fuelsafe UL-508 control panel. Dual Pump set controls standard is lead/lag. Each pump is sized for full duty/fill demand. Properly sized flow switch is included with each pump set but is shipped loose for installation at Day tank. If ordering ILOP the flow switch will be located at ILOP inlet. Remote mount allows for detection of line shear preventing an unintentional fuel spill.

Rugged dutile iron construction Positive displacement

• Compact close-coupled design
• Stainless steel shafts
• Durable steel helical gears provide quiet operation
• Process lubricated carbon graphite bearings
• O-ring cover seal for maximum leak protection
• Buna Lip Seal -standard

Inlet Manifold
• Y type suction strainer with bottom clean out and plug
• Priming Tee with riser pipe, isolation valve and dust plug.
• (Optional) Vacuum gauge with isolation valve.
• (Optional) Fusible globe valve. (Shipped Loose)
• (Optional) Stainless steel flex connectors w/ swivel adapters. (Shipped Loose)

Pump Skid Cabinet OpenILOP

Infinite Loop Overfill Protection System (ILOP)
Our proprietary Infinite Loop Overfill Prevention System eliminates the need for complex reverse overflow pumping systems. Our system uses supply pump pressure to safely return fuel back to the main tank without relying on another level switch to start a reverse overflow pump. (Optional)

Ace FuelSafe Cabinet Dispensing Package Specification:

Pump Skid Diagram

Pump Skid Diagram

• Powder Coat Finish System inside & out.
• Sturdy Piano Hinge Doors w/ Gasketed Enclosure.
• Lockable Door Hardware w/ Oversized Handles for cold weather operation.
• Reinforcement as needed to support equipment
• As built/ spec sheet holder
• Watertight piping and conduit penetrations
• Continuous Duty Pumps with Internal Relief.
• Y type suction strainer with bottom clean out and plug
• Priming Tee with riser pipe, isolation valve and dust plug.
• Optional Vacuum gauge with isolation valve.
• Ace QC certification

Fuel Maintenance

Pump Maintenance

Fuel Maintenance (water & particulate removal) packages can be offered in a standalone configuration or as part of the FuelSafe Day Tank package. This option includes fuel filtration skid as integral part of day tank system eliminating the need for added infrastructure required to support a standalone fuel maintenance system. Eliminating system complexity and minimizing cost impacts to the project.

The integral fuel maintenance system allows for the use of existing fuel supply and return lines as the fuel supply pumps act as both the prime mover for the fill operation and the fuel maintenance cycles. This ensures clean fuel, regular exercise schedules for supply pumps and minimizes installation complexities.